Setting up, Powering on/off the projector, Powering on the projector – Planar PR6020 User Manual

Page 12

English

Setting Up

Powering On the Projector

1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely

connected. The Power LED will flash green.

3. Turn on the lamp by pressing “Power” button on the control

panel. And the Power LED will turn green.

4. Turn on your source (computer, notebook, video player,

etc.). The projector will detect your source automatically

within “Management” menu; check that “Source Lock” has

been set to “Off”.



If you connect multiple sources at the same time, use the

“Source” button on the control panel or on remote control to

switch.

Powering On/Off the Projector



Turn on the projec-

tor first and then

the signal sources.

Lens Cap

Power