Panasonic KX-TG5456 - Manual (Page 18)

Preparation
18 For assistance, please visit http://www.panasonic.com/consumersupport
Setting the unit before
use
Setting the dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
1
Press {MENU} (middle soft key).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Set tel line”, then press
{SELECT}.
4
Scroll to “Set dial mode”, then press
{SELECT}.
5
Press {V} or {^} repeatedly to select
the desired setting.
6
Press {SAVE}, then press {OFF}.
Setting the date and time O
1
Press {MENU} (middle soft key).
2
Scroll to O, then press {SELECT}.
3
Scroll to “Date and time”, then press
{SELECT}.
4
Enter the current month, day, and year
by selecting 2 digits for each.
Example: June 15, 2005
Press {0}{6} {1}{5} {0}{5}.
5
Enter the current hour and minute (12-
hour clock format) by selecting 2 digits
for each.
Example: 9:30 PM
Press {0}{9} {3}{0}.
6
Select “AM” or “PM” by pressing {AM/
PM}.
7
Press {SAVE}.
L When the date and time are set, E
disappears from the base unit
display.
L If the handset beeps 3 times, the date
and time were not set correctly. Enter
the correct digits.
8
Press {OFF}.
Note:
L If you make a mistake when entering the
date and time, press {V}, {^}, {<}, or
{>} to move the cursor, then make the
correction.
Time adjustment (Caller ID subscribers
only)
When calls are received, Caller ID will
automatically adjust the date and time
(including daylight saving time).
L If you have not set the date and time
manually, Caller ID will not adjust the
date and time.
L You can turn this feature off (page 44).
Date and time
Time adjustment
Date:06.15.2005
Time:12:00 AM
0-9=Date&Time