Using the equalizer, Recalling equalizer curves 30, Adjusting equalizer curves 30 – Pioneer DEH-P3900MP User Manual
Page 30: Fine-adjusting equalizer curve 30, Audio adjustments, Recalling equalizer curves, Adjusting equalizer curves, Fine-adjusting equalizer curve
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
Equalizer curve
SUPER BASS
Super bass
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
CUSTOM
Custom
EQ FLAT
Flat
! CUSTOM is an adjusted equalizer curve
that you create. If you make adjustments to
an equalizer curve, the equalizer curve set-
ting will be memorized in
CUSTOM.
! When EQ FLAT is selected no supplement
or correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
EQ FLAT and a set equalizer curve.
% Press EQ to select the equalizer.
Press
EQ repeatedly to switch between the fol-
lowing equalizers:
SUPER BASS
—POWERFUL—NATURAL—
VOCAL
—CUSTOM—EQ FLAT
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
CUSTOM.
1
Press AUDIO to select EQ.
2
Press c or d to select the equalizer
band to adjust.
EQ-L (low)
—EQ-M (mid)—EQ-H (high)
3
Press a or b to adjust the level of the
equalizer band.
+6 to
–6 is displayed as the level is increased
or decreased.
# You can then select another band and adjust
the level.
Note
If you make adjustments,
CUSTOM curve is up-
dated.
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
EQ-L/EQ-M/EQ-H).
Level (dB)
Center frequency
Q=2N
Q=2W
Frequency (Hz)
1
Press AUDIO and hold until frequency
and the Q factor (e.g., F- 80:Q1W) appears
in the display.
2
Press AUDIO to select the band for ad-
justment from among low, mid and high.
Press
AUDIO repeatedly to switch between
the following functions:
Low
—Mid—High
3
Press c or d to select the desired fre-
quency.
Low:
40
—80—100—160 (Hz)
Mid:
200
—500—1k—2k (Hz)
High:
3k
—8k—10k—12k (Hz)
Audio Adjustments
En
30
Section
09