Using balance adjustment, Introduction of audio adjustments, Audio adjustments – Pioneer DEH-P3900MP User Manual

Page 29

Introduction of audio
adjustments

1 Audio display

Shows the audio adjustment status.

2 SW indicator

Shows when the subwoofer output is turned
on.

3 Bass booster indicator

Shows when the bass boost is in effect.

4 Loudness indicator

Appears in the display when loudness is
turned on.

5 FIE indicator

Shows when the front image enhancer is
turned on.

% Press AUDIO to display the audio func-
tion names.
Press

AUDIO repeatedly to switch between

the following audio functions:
FAD (balance adjustment)

—EQ (equalizer

curve adjustment)

—LOUD (loudness)—

SUB.W (subwoofer on/off setting)

—80: 0 (sub-

woofer setting)

—HPF (high pass filter)—BASS

(bass boost)

—FIE (front image enhancer)—

SLA (source level adjustment)

# When the subwoofer controller setting is
P/O :FUL, you cannot switch to SUB.W. (Refer to
page 34.)
# You can select the 80: 0 only when subwoofer
output is turned on in

SUB.W.

# When the F.I.E. function is on, you cannot se-
lect

HPF.

# When the rear output setting is R-SP :S/W,
you cannot select

FIE.

# When selecting the FM tuner as the source,
you cannot switch to

SLA.

# To return to the display of each source, press
BAND.
# If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Using balance adjustment

You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.

Press AUDIO to select FAD.

# If the balance setting has been previously ad-
justed,

BAL will be displayed.

Press a or b to adjust front/rear speak-

er balance.
FAD :F15 to FAD :R15 is displayed as the
front/rear speaker balance moves from front to
rear.

# FAD : 0 is the proper setting when only two
speakers are used.
# When the rear output setting is R-SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer out-
put on page 34.

Press c or d to adjust left/right speaker

balance.
BAL : L15 to BAL : R15 is displayed as the left/
right speaker balance moves from left to
right.

Audio Adjustments

English

Section