beautypg.com

Sensitive mode (specific types only), Clean and white mode, Features – Philips 700 Series User Manual

Page 8: Easy-start, Deactivating or activating the easy-start feature, Smartimer

background image

Sensitive mode (specific types only)

Gentle yet thorough cleaning for sensitive gums and teeth.
Clean and White mode

2 minutes of Clean mode with an additional 30 seconds of White mode to

focus on the visible front teeth.
Note: When the Sonicare is used in clinical studies, the default 2-minute Clean

mode must be selected. However, in whitening/stain reduction studies, the

Clean and White mode must be selected. The handle should be fully charged

and the Easy-start feature deactivated.

Features

Easy-start

This Sonicare comes with the Easy-start feature activated.

The Easy-start feature gently increases power over the first 14

brushings to help you get used to brushing with the Sonicare.

Note: Each of the first 14 brushings must last at least 1 minute to move

through the Easy-start ramp-up cycle properly.
Note: When the Clean and White mode is selected, the Easy-start feature is

inactive.
Deactivating or activating the Easy-start feature

1

Attach the brush head to the handle.

Place the handle in the plugged-in charger.

To deactivate Easy-start:

Press and hold the on/off button for 2 seconds. You hear 1 beep to indicate

that the Easy-start feature has been deactivated.

To activate Easy-start:

Press and hold the on/off button for 2 seconds. You hear 2 beeps to

indicate that the Easy-start feature has been activated.
Note: Use of the Easy-start feature beyond the initial ramp-up period is not

recommended and reduces the effectiveness of the Sonicare toothbrush in

removing plaque.
smartimer
The Smartimer indicates that your brushing cycle is complete by

automatically switching off the toothbrush at the end of the brushing cycle.

Dental professionals recommend brushing no less than 2 minutes twice a

day.

If you want to pause or stop brushing during the 2-minute brushing cycle,

press and hold the on/off button for 2 seconds. Press the on/off button

again and the Smartimer picks up where you left off.

The Smartimer automatically resets to the beginning of a 2-minute cycle if:

you stop brushing for 30 seconds or longer.

you put the handle in the charger.

-

-

-

-

-

-

EnglisH