Panasonic KX-TG2257S - Manual (Page 59)

59
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
FLASH Button
Pressing (FLASH/CALL!WAIT/PLAYBACK) or (FLASH/CALL!WAIT) allows
you to use special features of your host PBX such as transferring an
extension call or accessing special telephone services (optional) such as
call waiting.
•Pressing (FLASH/CALL!WAIT/PLAYBACK) or (FLASH/CALL!WAIT) causes to
release following operations:
—temporary tone dialing,
—muting your conversation, or
—recording your conversation.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1 Press (FUNCTION/2WAY!REC) .
2 Scroll to “Program” by pressing Ö or Ñ .
3 Press á .
4 Scroll to “Set flash time” by pressing
Ö or Ñ .
5 Press á .
•The current setting is displayed.
6 Select the desired time by pressing Ö or Ñ .
7 Press á (Save key).
•A beep sounds.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF) .
•If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
Flash time
:700ms
GF H
=Save
TAD program
H
Set flash time
Set line mode
Flash time
:110ms
Ringer pattern
H
Program
--------------