PYLE Audio PCAU33 - Manual (Page 6)

Specifications are typical; individual units might vary.
Specifications are subject to change and improvement without notice.
Specifications
5 - Pyle Pro PCAU33 Manual
Output Power, 2 channels driven
4-Ohm, 1 kHz, 1% THD .............................................................................. 15Wx2
4-Ohm, 1 kHz, 10% THD ............................................................................. 23Wx2
Max Power ................................................................................................... 75Wx2
Total Harmonic Distortion, 1 kHz Rated Power ................................................ 0.3%
Input Sensitivity, 1 kHz, 4-Ohm Rated Power
LINE ............................................................................................................ 200mV
USB ............................................................................................................ 200mV
Frequency Response ........................................................................... 20Hz-20kHz
Signal to Noise Ratio, 1 kHz, 4-Ohm Rated Power
LINE ............................................................................................................... 80dB
USB ............................................................................................................... 80dB
Tone Controls
BASS ............................................................................................. +/-10dB, 100Hz
TREBLE ......................................................................................... +/-10dB, 10kHz
Power Requirement ................................................. 120V AC 60Hz/230V AC 50Hz
Power Fuse .......................................................... 1.5A, 250V fast-acting, 5x20mm
Dimensions, inches (mm) WxHxD ..................... 7.48 x 2.87 x 5.39 (190 x 73 x 137)
Weight, lbs (kg) ....................................................................................... 4.61 (2.09)