Locking the set timer function – Philips 14PT1347 User Manual
Page 6
6
This function (only available on certain models) allows you to lock the set in order
to limit its use completely or partially.
Key lock
æ
Press
, select
TV LOCK
( ) and press
.
Â
Set the
LOCK
to
ON
.The keys are locked.
ê
Switch off the set and put the remote control out of sight.The set cannot be
used (it can only be switched on using the remote control).
To cancel: switch
LOCK
to
OFF
.
Programme lock
æ
Press
, select
TV LOCK
( ) and press
.
Â
Select
PARENTAL CONT
. and press
.
ê
Enter your confidential access code.The first time, enter the code 0711 then
confirm by re-entering 0711.The menu appears.
®
Select
PROGRAM NO
. and use keys
or
to
to enter the number
of the programme or socket you wish to lock.
To lock all of them, select
ALL
.
†
Select
LOCK
then
YES
.
Ú
Repeat stages
®
and
†
for each programme to be locked.You can lock 5
programmes separately.
º
P ress
to exit.To watch a programme which has been locked you will now
need to enter the confidential code; otherwise the screen will remain blank.
When a locked programme is displayed, use the
P
keys to access other
programmes (the
keys are used to enter the code). Caution: in the case of
encrypted programmes which use an external decoder, it is necessary to lock the
corresponding EXT socket (and not the programme number).
To unlock all programmes
Repeat stages
ж
-
к
above, then:
®
Select
CLEAR ALL
and press
.All programmes are unlocked.
To change the confidential code
Repeat stages
ж
-
к
above, then:
®
Select
CHANGE CODE
and enter your own 4-digit number.
†
Confirm by entering it again.Your new code will be stored.
If you have forgotten your confidential code, enter the universal code 0711 twice.
To exit: press
.
This function (only available on certain models) allows you to use your TV as an
alarm clock.
æ
Press
, select
TIMER
( ) and press
.
Â
The
SET CLOCK
menu appears. Enter the time (
or
).
ê
Select
TIMER ACTIVE
and press
to switch the timer on or off.
®
Select
PROGRAM NO.
and enter the number of the programme required.
†
Select
START TIME
and enter the time at which the set is to switch on.
Ú
Press
to put the set into standby mode. It will switch on automatically at
the programmed time. If you leave the set switched on, it will merely change
programmes at the set time.
The set switches off automatically after 4 hours if no further commands are given.
Locking the set
Timer function