Polycom SpectraLink 1725-36024-001 - Manual (Page 10)

10 English
Answer a telephone
call during a PTT
transmission
Press the
START
key. PTT transmissions will be
pre-empted by the telephone call.
Enable PTT vibrate To enhance the alerting of a PTT call, PTT
Vibrate may be enabled. When PTT Vibrate
is enabled, the handset will vibrate three times
whenever a PTT broadcast is received, whether
the handset is in standby or in a call. If in a call,
the chirp alert will also sound. The vibration
does not replace any PTT tone volume already
set. To set the handset for PTT vibrate only,
enable PTT Vibrate and set the tone volume
to zero.
Start a telephone
call during a PTT
transmission
Press the
START
key and dial the number. PTT
transmissions will be pre-empted during the
telephone call.
Turn off PTT Change to a different profile (Silent and Vibrate
disable PTT by default).
Subscribe to
additional PTT
channels
Press the
Cfg
softkey to open the
Config Menu
and select
Push-to-talk
.
Select
Subscribed Channels
and then select the
channels you want to add. Subscribed
channels are marked with an asterisk (*).
If you want to Then