Hyundai HGC-300 - Manual (Page 7)

[6] [7]
USING THE BATTERY
u
Insert the bottom of battery into the groove at
the bottom of the handset. Then
v
press in the
top of the battery until it snaps.
INSTALLING THE BATTERY
REMOVING THE BATTERY
Push the tab
u
with one hand and lift the top
of the battery
v
to separate.
The battery must be correctly placed in the battery com-
partment. If battery is incorrectly inserted, the handset
will not turn on or the battery may slip out during use.
1
1
2
2
1
1
CHARGING THE BATTERY
1
STATUS OF CHARGER LED
Charging in Progress
(Red Color On)
Charging Completion
(Green Color On)
POWER CONNECTION
Connect the charger to a standard 240V AC outlet.
• It is recommended that you have to check out cleanness of the
battery’s contact surface if the LED has a flickering.
• LED may change from red to green back and forth after battery
is full charged, but it doesn’t mean any problem with charging
battery.
HGC-300E(hojoo)10/26 2001.7.27 6:18 PM Page 12