Philips HD7826 - Manual (Page 9)

8 Put a bowl (with a capacity of at least 1.6 qt./ 1.5 litres) under the
spout openings to collect the water.
9 Press the on/off button 3.
Type HD7826/HD7824 only: after pressing the on/off button, the light
rings around the 1-cup button q and the 2-cup button qq/
w
burn
continuously.
10 Press the 1-cup button q AND the 2-cup button qq briefly at the
same time.
The boiler fills itself with water from the water reservoir. This may take
some time (approx. 90 to 150 seconds). The machine switches off
automatically when the flushing cycle ends. During the flushing cycle the
machine produces more noise than during a regular brewing cycle.
Never interrupt the flushing cycle halfway. If you do, the boiler will not
fill itself properly.
Note: Before you use the machine for the first time, clean the coffee spout, the
coffee collector and the pod holders with hot water and some dish soap or in
the dishwasher. Clean the water reservoir thoroughly in hot water, if necessary
with some dish soap.
Now your Philips SENSEO
\ coffee machine is ready for use.
Brewing coffee
1 Fill the water reservoir with cold water up to the MAX indication
and put it back onto the machine.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
q MIN: minimum amount of water required to brew one 4 oz. cup of
SENSEO \ coffee.
qq /
w
MIN: minimum amount of water required to brew one 8 oz.
mug or two 4 oz. cups of SENSEO \ coffee.
A full reservoir allows you to make up to eight 4 oz cups or four 8 oz.
mugs of SENSEO \ coffee. This makes it unnecessary to fill the water
reservoir each time you want to make a cup of coffee.
-
-
-
9