Parker Products WCS-SIF-01 - Manual (Page 12)

1
WCS-SIF-01
Training & Maintenance Manual
Pneumatic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
How To Order Add-A-Fold
Assemblies
1. List Add-A-Fold Assembly call out. This automatically
includes the end plate kit assembly.
. List complete Valve and Base model number. List left to
right, LOOKING AT THE CYLINDER PORTS on the #1
end of the manifold. The left most station is station 1.
Station 2 Station 1
#14 End
#12 End
Example
Application requires a -Station manifold with weld block and
valves, and requires isolation between station 1 and for port
#3 galley only.
Item Qty. Part No.
01 1 AAHE00
0 1 HVXHG0B9C ...................................Station 1 &
03 PS411157MCP ....................................Station 1 &
04 1 WPJ1XXXN .................................................Station
05 1 HEVXHG0B9C ..........................................Station
06 1 PS363P .....Galley 3 Isolation Between Station 1 &
Valve Series
H2 Right & Left
End Plate
Port Type
0 NPT
1 BSPP “G”
Valve End Plate Port Number of
Series Type Type Stations
AA H2 S 0 02
Add-A-Fold Assembly Model Number
Example:
2-Station Manifold with (2) H2 Valves
On Manifold Bases
End Plate Type
D † 25-Pin
E † 19-Pin
G † M3, 1-Pin
S Standard -
Non-collective Wiring
† Collective Wiring Module
Included.
NOTE: Construct manifold assemblies from left to right while looking at
the cylinder ports.
Ordering Information
Number of
Stations
02
* Only Available
with -Station
Manifold when
Used in Welding
Applications.