Philips DVD616K - Manual (Page 9)

9
DVD616K IFU for /751 3141 016 18911
Preparation
Inserting batteries into the
Remote Control
1 Open the battery cover.
2 Insert batteries with the correct polarity as
indicated by the + and - symbols inside the
battery compar tment.
3 Close the cover.
+
-
+
-
CAUTION!
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed off properly and
kept away from children.
Using the Remote Control
● Direct the remote control at the remote sensor
of the DVD player.
● Do not drop or give the remote control a shock.
● Do not leave the remote control near extremely
hot or humid place.
● Do not spill water or put anything wet on the
remote control.
NTSC/PAL Conversion
This player is equipped with a NTSC/PAL
conversion feature to convert the video output
of the disc to match your TV system. The
conversions supported are as below:
NTSC PAL NTSC
NTSC PAL PAL
NTSC PAL NTSC
NTSC PAL PAL
Disc Output format
Type
DVD
VCD
NTSC
Format Selected mode
PAL
NTSC
PAL
NTSC PAL AUTO
Notes:
– AUTO can only be selected when using a TV
that has both the NTSC and PAL systems.
– Slight picture distortions may occur due to this
conversion. This is normal. Thus, the AUTO format is
most suitable for the best picture quality.