Philips SYE5600 - Manual (Page 9)

EN
9
Network cable
1 Ethernet UTP5e RJ-45 connector
Either - Connects to the network port of the powerline ethernet adapter
Or - Connects to the network device
2 Ethernet UTP5e RJ-45 connector
Either - Connects to the network port of the powerline ethernet adapter
Or - Connects to the network device
Install
Share the broadband Internet subscription
(option A1)
1 When you want to enable personal security on the powerline ethernet network,
write down the Product ID code (for example, WQH7-E2JU-3QLH-YBRY).
Refer to ’Secure’ on page 11.
2 Take the network cable.
3 Plug the connector of the network cable into the network port of the modem or
router.
4 Plug the other connector of the network cable into the network port of the
powerline ethernet adapter.
5 Plug the powerline ethernet adapter into the power supply.
> The PL-LINK light comes on.
6 Connect a computer or a network device to the powerline ethernet network (refer
to the options A2+).
1
2
AC
AC
Internet
Modem Router
2
3 4 5