PYLE Audio 747 - Manual (Page 11)

11
HANDLE FEATURES
1. Model 745 is supplied with a standard handle.
2. Model 746 is supplied with a soft grip handle.
3. Model 747 is supplied with a rotating handle and soft grip.
HOW TO HOLD SAW MODEL 745 and 746
Hold saw as shown in Fig. 8. The gear housing, intermediate plate, blade
and pivoting guide shoe may be made live if the blade cuts into live wiring
within a wall.
TO PREVENT ACCIDENTAL ELECTRICAL SHOCK THE SAW
MUST BE HELD AS SHOWN IN FIG. 8, AND MUST HAVE THE RUBBER
FRONT HOUSING COVER PROPERLY INSTALLED AND NOT DAMAGED.
HOW TO HOLD SAW MODEL 747 with ROTATING HANDLE
Hold saw as shown in Fig. 8A or 8B. The gear housing, intermediate plate,
blade and pivoting guide shoe may be made live if the blade cuts into live
wiring within a wall.
The Model 747 handle can be rotated 90 ° to the right or 90 ° and 180 ° to the
left. To rotate handle, depress locking lever (A) Fig. 8C and rotate handle to
the desired position. After adjusting make sure handle is locked in position
before using the saw.
NOTE: The handle will not rotate 360 ° .
Fig. 6
A
B
A
Fig. 7
Fig. 8