Philips CRA01/00 User Manual

Page 2

Text mode
Original mode

A. Introduction

CRA01/00 is a Loop-Through (LT) interface card designed to support VGA content connectivity
and RS232 control in daisy chain configurations on select Philips SmartCard-enabled displays.
Please refer to the product leaflet for the detailed feature specifications.

This guide will provide the basic steps for installing the LT card into a Philips SmartCard-enabled
display.

B. Package Contents

Your CRA01/00 package should contain the following:

1 x LT card module
1 x LT card cap (see Fig. 1 below)
1 x VGA cable (30cm/ 11.811”)
1 x RS232 cable (20cm/ 7.874”)
Installation Guide (this document)
Global Warranty Card

Fig. 1 – LT card cap

C. Brief Electrical Specifications

Supply Voltage:

12V +/- 10%

Supply Current:

0.12A (Nominal)

Power Consumption:

1.44 W (Nominal)

Page 2 of 9

LT Installation Guide 1.1 (140907)

12NC: 3139 125 39281