Philips TV Remote Control - Manual (Page 18)

18
Record with your video recorder without EasyLink
To record S-VHS quality, connect a S-VHS peripheral directly to the video
recorder.
1. Record a TV programme
using only an aerial cable
• Select the programme number on your video recorder.
• Set your video recorder to record.
(See the handbook for your video recorder.)
Switching programme numbers on your TV does not disturb recording !
Record with a video recorder with EasyLink
If you have connected a S-VHS video recorder provided with the EasyLink function,
you can record S-VHS-quality from a S-VHS peripheral connected to the front side of
the TV. (E.g. from a S-VHS camcorder.)
In TV mode it is possible to start a direct recording of the programme which is being
displayed on the TV screen.
• Press at the same time the VCR key on the left side and the ®M key of the remote
control.
The video recorder switches on when it was in standby and a message of what is
being recorded appears at the bottom of the screen.
The video recorder starts recording the programme that appears on the screen.
• Press the ‡a key to stop the recording.
When recording a programme from a peripheral connected to EXTERNAL 1 or
FRONT , you can not select another TV programme on the screen.
To watch TV programmes again, press the programme number you want to select
twice . Then the recording is stopped and your video recorder switches to standby.
If you switch to standby during recording a programme from a peripheral connected
to
EXTERNAL 1 or FRONT , the blinking red lamp on the front of your TV indicates
that you are still recording. The blinking stops after the recording is finished.
using a eurocable connected to the
euroconnector
EXTERNAL 2
With a video recorder connected to EXTERNAL 2 it is
possible to record a programme from your TV as
well as from other connected equipment.
• Select the programme number or external
input on the TV.
• Select the right external on your video
recorder.
• Set your video recorder to record.
You record what you are watching on the
screen.
Do not switch programme numbers or do not
switch off your TV when you are recording !
using a eurocable connected to the
euroconnector
EXTERNAL 1
With a video recorder connected to EXTERNAL 1 you
can only record a TV channel.
• Select the programme number on the TV.
• Set your video recorder to record.
Switching to a programme from a connected
peripheral equipment does not disturb
recording .
2. Record a programme on your video recorder connected to
EXTERNAL 2 from Audio/Video equipment connected to EXTERNAL 1,
EXTERNAL 3 or FRONT
• Switch on the equipment.
• Select the right external on your video recorder.
• Set your video recorder to record.
You record what you are watching on the screen.
Do not switch programme numbers or do not switch off your TV when you are
recording !
3104 305 4714.5.gb 28-05-1999 09:40 Pagina 18