Philips TV Remote Control - Manual (Page 16)

16
Camera and camcorder
• Connect your camera or camcorder at the front side of your TV.
• Connect the equipment to VIDEO
2 and
AUDIO L
1 for mono equipment.
• Press the X key under the door of the remote control repeatedly to select
the sound coming from one or both loudspeakers of your TV.
• For stereo equipment, also connect AUDIO R 1.
S-VHS quality with a S-VHS camcorder is obtained by connecting the S-VHS
cables with the
S-VIDEO input 3 and AUDIO inputs 1.
Other equipments
Connect the eurocable 1 to EXTERNAL 1 as shown opposite.
Only for CD-i and Photo CD :
• Press f and U at the same time.
• Select CD-i/Photo CD Present in the Setup menu of the INSTALLATION
menu.
This offers you optimum picture quality for your CD-i or Photo CD.
• Keep the red MENU key pressed to switch off all menus.
Audio equipment / Amplifier
• Connect the audio cables to the audio input of your audio equipment and to
AUDIO L and R at the back of your TV.
You can listen to your TV sound via your audio equipment.
Headphone
• Insert the plug into the headphone socket L at the front side of the TV.
• Press ¬ on the remote control to switch off the internal loudspeakers of the
TV.
The headphone impedance must be between 8 and 4000 Ohm. The headphone
socket has a 3.5 mm jack.
In the SOUND menu select Headphone to adjust the headphone volume and
to select dubbed or original language (when the TV channel broadcasts in two
languages) for your headphone sound. See p. 10.
If you want to connect more equipment to your TV, consult your dealer.
AUDIO
n
1
1
EXTERNAL
S-VIDEO VIDEO AUDIO L R
2 1 3
INSTALLATION
Menu language
Country
Automatic Installation
Manual Installation
Give name
Reshuffle
Favourite programmes
Connection diagrams
SETUP J SETUP
SETUP
CD-i/Photo CD
Decoder/Descrambler
Information Line
INSTALLATION J CD-i/Photo CD
3104 305 4714.5.gb 28-05-1999 09:40 Pagina 16