Poulan Pro PPG 6000 - Manual (Page 20)

20
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Engine will not start Engine switch is OFF Turn engine switch to ON.
No fuel Fill fuel tank.
Oil level is low Check engine oil level and fill, if necessary
Check spark plug condition Replace spark plug.
Fuel is not reaching carburetor Clean fuel sediment cup.
Fuel valve is in OFF position Move fuel valve to ON position
AC receptacle does not work Circuit breaker is OFF Turn ON the AC circuit breaker.
Item plugged in is defective Try a different item.
Generator makes a “spark knock” or
“pinging” noise
An occasional light “knocking” or
“pinging” under heavy load is not
a cause for concern. However, if
the knocking or pinging occurs
under normal load at a steady
engine speed, the problem may
be with the brand of gasoline
being used.
Switch to a different brand of gasoline,
making sure that the octane rating is 86 or
higher. If problem continues, contact your
nearest authorized service center.
If problem persists after trying the above solutions, please call 1-866-237-1049 for your nearest authorized service center.