Parkside EXCENTERSLIBER XQ270 - Manual (Page 9)

10 GB/IE
½
Avoid contact with the moving sand-
ing sheet.
½
Use the appliance only with a sanding
sheet in place.
½
Never use the appliance for purposes
other than those intended and only
with original components / accessories.
½
Introduce the appliance to the work
piece with it switched on. On task com-
pletion, lift the appliance from the work piece
and then switch it off.
½
Permit the switched off appliance to
come to a complete standstill before
putting it down.
½
The appliance must always be kept
clean, dry and free of oil or grease.
½
Keep your workplace clean. Material
mixtures are particularly dangerous. Light met-
al dust can burn or explode.
½
Do not use the electric tool with a
damaged lead. Do not touch the damaged
lead and remove the mains plug if the lead be-
comes damaged while you are work-ing with
the device. Damaged leads increase the risk of
an electric shock.
© Original accessories / tools
½
Use only the accessories detailed in the operat-
ing instructions. The use of inserted tools or ac-
cessories other than those recommended in the
operating instructions could lead to you suffer-
ing an injury.
© Before use
© Selecting the Grinding Disc
Metal Removal and Surface:
The rate of metal removal and the surface quality
are determined by the grain size of the grinding disc.
˽
lease note that corresponding grinding discs
with different grain sizes should be used for
processing different materials.
© Changing sanding sheets
WARNING! RISK OF INJURY! Before
carrying out work on the appliance, always re-
move the plug from the power socket.
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
˽
Lift the grinding disc 5 at the side and pull it off
from the backing pad 4 in order to remove it.
Note: Before securing a new sanding sheet 5 ,
remove all dust and dirt from the sander plate 4 .
˽
Ensure that the openings in the sanding sheet 5
concur with the boreholes of the sanding plate 4 .
© Dust / Swarf Removal by Suction
½
Please note the “Safety instructions” section.
Removal by Suction with Dust Collector:
˽
Push the dust collector 3 completely onto the
device.
˽
In order to empty the dust collector 3 pull it
off the device.
Note: Empty the dust collector 3 in good
time and regularly in order to ensure the opti-
mum removal of dust by suction.
External Exhaust Suction (see Illustration A):
Connection:
˽
Push the adapter for external exhaust suction 7
on to the exhaust nozzle 6 and turn it clock-
wise to fix it in place. If necessary, use the re-
ducing piece
8 by pushing it into the adapter
for external exhaust suction 7 .
˽
Push the hose of an approved suction device
(e.g. a workshop vacuum cleaner) on to the
adapter for external exhaust suction
7 , using
the reducing piece if necessary 8 .
Removal:
˽
Pull the hose of the suction device off the
adapter for external exhaust suc-tion
7 .
˽
Turn the adapter for external exhaust suction 7
in an anticlockwise direction and pull it off with
the reducing piece
8 if necessary.
General safety advice for electrical power tools / Before use