Unpacking, Operation – Pittsburgh Corning 95840 User Manual
Page 4

Page 4
SKU 95840-95841
for technical questions, please call 1-800-444-3353.
If the Battery Cover is open
Do not bump or shock the torque Wrench when applying it to any workpiece.
Rough treatment may damage the highly sensitive mechanism.
unpacKing
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
operation
On/Off Switch
Function Button
Handle Dial (Torque range
settings)
Battery Compartment
Battery Cover
Battery
figure 1
Put on ANSI-approved face shield or safety glasses.
Select the desired socket. Make certain that the socket fits properly on the Nut or
Bolt being threaded on or off.
Set the Torque Wrench to the desired Torque. The Torque Wrench can be set for
digital readout in Inch-Lbs., Ft.- Lbs., N-m, m-Kg and Cm-Kg.
Slide On-Off Switch to the ON position-see Figure 1. The Wrench has an Auto-
Off Feature and will automatically shut off after two minutes of non-operation.
Press the Function Button to scroll through the readout functions-see Figure 1.
Rotate the Handle Dial until the LCD readout shows the desired Torque-see Figure
1.
d.
16.
1.
2.
3.
4.
5.
6.