Pittsburgh Corning 95840 - Manual (Page 2)

Page 2 SKU 95840-95841 for technical questions, please call 1-800-444-3353.
specifications
95840-3/8” 95841-1/2”
Drive 3/8” 1/2”
Net Weight 2.2 Lbs. 2.55 Lbs.
Material
Carbon steel head and tube,
thermoplastic LCD read-out,
rubber Handle Carbon steel head and tube,
thermoplastic LCD read-out,
rubber Handle
Tool Length 14-3/4” L 17-3/4” L
Head Depth .75” T .75” T
Head Width 1.7” W 1.7” W
Gear Action 10 degrees 10 degrees
Shaft Width 0.87” 0.87”
Maximum Range
83.3 Ft-Lbs./ 1000 In. Lbs.,
m-KG 11.5/ cm - KG 1150/
N-m113 150 Ft.-Lbs., 1800 In. Lbs.,
m-Kg 20.7, CM-KG 2070, N-m
203
Minimum Range
16.0 Ft. Lbs./ 195 In. Lbs., M-
KG 2.25/ CM -KG 225/
N-m 22.0
30.0 Ft. Lbs., 360 In. Lbs., M-
Kg 4.1, CM-KG 410, N-m 40.5
Increments 0.1 0.1
Accuracy
3% acceptable variation
through full torque range 3% acceptable variation
through full torque range
Power Source
3 Volt Battery-CR2032
(included) 3 Volt Battery CR2032
(included)
The Torque Wrench is certified to have been calibrated prior to shipment to the accuracy of +/-
4% in the right hand direction and +/- 6% in the left hand direction on readings 20% to 100% of
capacity. On readings below 20% of capacity, the accuracy is +/- two minor scale increments.
save this Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
general safety rules
Warning!
reaD anD unDerstanD all instructions
failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
saVe these instructions