Photogenic Professional Lighting PowerLight 1250 - Manual (Page 13)

13
SPECIFICATIONS
PL2500DR
General:
Flash Power................................................ 32 to 1000 watt-seconds
maximum. (6 f-stops)
Flash Duration............................................ 1/770 second at Full
1/345 second at 1/32
Recycling time................................................0.8 to 3.0 seconds
Power Control.................................................Full to 1/32 range.
0.1 f-stop resolution.
Digital Display &
Control Accessory
Modeling Light Power ...................................250 Watt Quartz, ESS
Modeling Light Control .................................Full to 1/32 range.
0.1 f-stop resolution.
Line voltage regulated.
Triggering ......................................................Built in Photoslave.
Push to Test button.
Synchronization Jack.
5 volt isolated.
Main Supply ................................…..............105-125 VAC, 60 Hz, 10 Amp.
Consumption ................................................. 0.2 amps idling,
15 amps charge.
Voltage Stabilization .....................................Plus or minus 0.05 f-stop.
Overload Protection .......................................Fuse. 3AG type,
15 Amp, SLO-BLO.
Packaging ......................................................Extruded Aluminum case.
Weight ............................................................7 pounds.
Dimensions (housing only).............................4.5” x 4.5” x 8.75”
Flashtubes and Modeling Lamps:
Flashtube ................................................... Plug-in style, use only
Photogenic’s Standard C4-19
or C4-19C.
Modeling Lamp ..........................................250-Watt Quartz Halogen, ESS.
150-Watt Quartz Halogen, ESP.
100-Watt Quartz Halogen, ESR.
Fuse ............................................................3AG type, 15 Amp, SLO-BLO.