Peavey ENVOY 112 - Manual (Page 7)

7
Envoy® 110 and Bandit® 112
TransTube® Series Instrument Amplifiers
So, you are the owner of a new Peavey TransTube Series instrument amplifier. Congratulations! Whether you are a beginner or
seasoned pro, you could not have found a more practical, feature-packed amplifier.
Peavey’s patented TransTube circuitry has moved forward into the third generation of products, leading the industry in tube
emulation. There is no other solid-state amp that more closely replicates the characteristics of a tube amp.
Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC line
voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel
of the unit. Each product feature is numbered. Refer to the front panel diagram in this manual to locate the particular
features next to it's number.
Please read this guide carefully to ensure your personal safety as well as the safety of your TransTube amplifier.
COMMON FEATURES:
• High and Low Gain Inputs accommodate a variety of instruments
• Two distinct TransTube channels each featuring:
• Separate Volume/Gain controls
• Low, Mid and High EQ
• EQ/Gain voicing switches
• Channel select switch on front panel
• Reverb with reverb level control
ENGLISH
VENTILATION: For proper ventilation, allow 24" clearance from nearest combustible surface.
ENVOY 110 FEATURES:
• 10” Blue Marvel® speaker
• 40 watt power amplifier
• Preamp output
• Headphone jack
• Footswitchable boost and channel selection
• Speaker Simulated Direct Output BANDIT 112 FEATURES
• 12” Blue Marvel® speaker
• 100 watt power amplifier (80 watts into internal speaker)
• Footswitchable boost and channel selection
• Effects Loop
• Speaker Simulated Direct Output with adjustable level
• External speaker jack