Peavey ENVOY 112 - Manual (Page 14)

14
Series Specifications
Power Amplifier Section:
Rated Power and Load:
Power specs measured with
Power Level @ 100%
80 W RMS into 8 Ω
100 W RMS into 4 Ω
Power @ Clipping (Typically):
(1 kHz, 120 VAC line)
80 W RMS into 8 Ω
100 W RMS into 4 Ω
Frequency Response:
+0, -3 dB 100 Hz to 20 kHz @ 65 W
RMS into 8 Ω
Hum and Noise:
Greater than 90 dB below rated
power
Power Consumption:
(Domestic)
300 W @ 60 Hz, 120 VAC
(Export)
300 W @ 50/60 Hz, 220-230 VAC
Effects Send:
Load Impedance: 1 k Ω or greater
Nominal Output Level:
-5.4 dBV, 535 mV RMS
Effects Return:
Load Impedance: High Z, 22 k Ω
Designed Input Level:
-5.4 dBV, 535 mV RMS
Boost Level @ 10:
+ 10 dB Boost
Speaker Simulated Direct
Output Level @ 10:
700 mV, -3 dBv
System Hum & Noise @
Nominal Input Level:
(20 Hz to 20 kHz unweighted)
Greater than 80 dB below rated power
Equalization:
Special Low, Mid, and High passive
type EQ.
Vintage/Classic/Warm switch (clean)
Three distinct EQ voicings
Classic/Modern/High gain switch (lead)
Three different EQ and Gain voicings
External Footswitch Functions:
Clean or Lead channel selection
and volume Boost
Dimensions (H x W x D):
20.875" x 23.25" x 11.25"
53.02 cm x 59.06 cm x 28.58 cm
Weight:
40.9 lbs (18.55 kg)
Bandit® 112
Features and specifications subject to change without notice.