Philips DVDR3455H - Manual (Page 40)

English
40
About timer recording
Use ‘Timer Recording’ to automatically
start and stop a recording at a later date/
time. The recorder will tune to the right
program channel and begin recording at
the specifi ed time.
With this recorder, you can pre-program
up to 20 recordings.
To make a timer recording, your
recorder needs to know:
– The date you want to make the
recording.
– The recording input source.
– The start and stop time of the
recording.
– The mode of record quality, see
“Before Recording – Default
Recording Settings.”
CH CH
SELECT
TIMER
OK
Timer recording (VCR
Plus+
® System)
This is a simple programming system for
recorders. To use it, enter the PlusCode
programming number associated with
your television program. You can fi nd
this number in your TV listings magazine.
All the information needed by the
recorder for programming is contained in
the programming number.
A
Turn on the TV power. Select the
correct Video In channel at the TV.
If you are recording directly to a
DVD disc, insert the DVD recordable
disc before proceeding to step
B .
B
Press TIMER on the remote control.
The timer schedule list appears.
1
2
3
4
5
6
Source Rec Mode Date Start End Rec To
Timer Schedule
C
Use ST keys to highlight the next
available empty slot and press OK.
The VCR Plus+®. System setup menu
appears.
Please enter the programming
number for your recording. Select
MANUAL for manual timer
recording. Press [BACK] to go
to the timer list
OK CONFIRM OK MANUAL
TIPS: Set the appropriate mode of record quality for HDD recording, the same record quality will be transferred
from HDD to a recordable DVD.
Timer Recording