Philips DVDR3455H - Manual (Page 25)

English
25
Step 3: Installation and Setup
(continued)
GENERAL settings (underlined options are the factory default settings)
Auto Program
Select to start automatic TV channel programming.
1) Use ST keys to highlight { Auto Program - Search } and
press X .
A warning message will appear. Select OK OK and press
OK on the remote control.
2) Select { Tuner Input Source } and press X to access the
options:
{ Cable } – Select this if the recorder is connected via a
cable box/ satellite receiver.
{ Air } – Select this if the recorder is connected directly
to the antenna wall outlet.
3) Use ST keys to highlight OK CONTINUE and press OK.
The automatic TV channel search will start. This process
may take several minutes. Once complete, the total number
of channels found will appear on the TV.
Manual Program Select to modify your preset TV channels.
1) Use ST keys to highlight { Manual Program - Edit } and
press X .
The modify channel options will be displayed.
2) Use ST keys to one of the options and press X .
{ Name } – Use CH +/- to select by the channel name
for modifying.
{ Frequency } – Select this to adjust the frequency of the
channel.
– Use WX keys to adjust the frequency. Press
OK on the remote control to confi rm the
setting.
{ Fine tuning } – Select this to fi ne-tune the TV channel
manually if the reception is poor.
– Use WX keys to fi ne-tune the frequency.
{ Skip } – Select this to set the channel to be skipped.
The skipped channels can only be accessed by
pressing the corresponding number key on the
remote control.
– Use ST keys to select { Yes } if you wish to
skip this channel.
3) To confi rm all the changes, select OK OK and press OK on the
remote control to exit to the previous screen.
Record Quality
Auto Program
Manual Program
SP
Search
Edit
Auto Chapter Marker 5min.
SETUP MENU - GENERAL
Manual Program
Name
OK
0 7 3 .2 5 M h z Frequency
Fine tuning
Skip
C h 0 0 1
Yes
OK OK CANCEL