Panasonic DMC-LC1GN User Manual

Page 99

Playback (advanced)

¬Suggestions/Tips ¬

• Refer to P96 carefully when

connecting to the OS except for
Windows XP and Mac OS X with
setting [USB MODE] to [PTP].

• When connecting to a PC, we

recommend using the AC adaptor as
the power source.

• If the remaining battery power

becomes low during communication,
the power indicator blinks and the
alarm beeps. In this case, stop the
communication. Then turn the camera
off and charge the battery.

• When connecting to a PC, pictures

and sounds are not output from the
[AV OUT/REMOTE] socket.

• It may take time to display the

communication screen depending on
the PC.

• You can only load pictures from the

camera and cannot write them on the
card or delete them.

• Use the supplied USB connection

cable only.

• When there are 1000 or more pictures

on the card, the pictures may not be
imported.

• When the PC recovers from the

standby mode while connecting it to a
camera with USB connection cables,
they may not properly communicate
each other.

LC1-GN.book 99 ページ２００４年１月２９日　木曜日　午前９時１５分