Panasonic KX-TAW848 - Manual (Page 81)

1.9 User-supplied Equipment
User Manual 81
To hold the current call and then talk to the new party
1.9.3 Voice Processing System
You or an outside party can access the Voice Processing System from a telephone.
— Call Forwarding to Voice Mail (Voice Mail Integration)
If your PBX has a Panasonic Voice Processing System connected (e.g., KX-TVS series) using digital
integration, the following features are also available:
— Live Call Screening (LCS)
— Two-way Record
Call Forwarding to Voice Mail (Voice Mail Integration)
— To forward your calls to your mailbox
— To transfer a call to a mailbox
— To listen to messages
If you cannot answer calls, you can forward them to your mailbox. You can select the type of incoming
calls (Intercom Calls/Outside Calls/Both Calls). If your telephone has a Message button, the Message
light turns on and lets you know you have messages. Even if a Message button is not provided, you
will hear an indication tone* when going off-hook.
You can also transfer received outside calls to a mailbox so that calling parties can leave messages.
If you create a Voice Mail Transfer button on your phone, the transfer is done without knowing the
mailbox number (Voice Mail Transfer).
The duration for recording depends on the voice processing system.
• In this case, FLASH/RECALL button on a proprietary telephone is in the External Feature
Access (EFA) mode.
• Regarding the service code, consult your dealer.
Customizing Your Phone
• 3.1.3 Customizing the Buttons
Create or edit an External Feature Access (EFA) button.
PT/PS SLT
Enter desired
service code.
desired service
code
Enter desired
service code.
Press Recall/
hookswitch.
Press FLASH/RECALL or EFA.
Or press TRANSFER and
then enter 60.
While hearing a tone While hearing a tone
Enter 60.
6 0
desired service
code
6 0
(EFA)
FLASH/RECALL
OR
OR