Panasonic KX-TAW848 User Manual
Page 16
1.1 Before Operating the Telephones
16
User Manual
Customized Buttons
If the term is in parentheses like (Account) in this section, it means a flexible button has been made
into an "Account" button. To customize, refer to "3.1.3 Customizing the Buttons".
VOICE CALL:
Used to monitor an intercom call
automatically, but it cannot be used for
hands-free conversations.
Navigator Key/Volume Key:
Used to adjust the volume and the
display contrast or select desired
items.
PROGRAM:
Used to enter and exit the
Programming mode.
Programmable Feature (PF):
Located on the right part of the CO
button array or on the DSS Console.
Assigns the desired button and used to
access the stored feature. Mostly used
as a One-touch Dialing button. (Only
the "F and number" may be shown on
some telephones.)
Buttons
Feature
Loop-CO (L-CO)
Used to access an idle CO line for making outside calls.
Incoming outside calls from any CO line arrive at this button.
Group-CO (G-CO)
Used to access an idle CO line in a specified CO line group for making
outside calls.
Incoming calls from CO lines in the assigned CO line group arrive at this
button.
Single-CO (S-CO)
Used to access a specified CO line for making or receiving outside calls.
Direct Station Selection (DSS)
Used to access an extension with one-touch.
It is also possible to be changed to the other feature button.
One-touch Dialing
Used to access a desired party or system feature with one-touch.
Group Directory Number (G-
DN)
Used to access a specified incoming call distribution group for making or
receiving calls.
Message
Used to leave a message waiting indication or call back the party who left
the message waiting indication.
Message for another extension Used to have a Message button for another extension.
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
Used to forward all calls to a specified destination or refuse.
FWD/DND—Outside calls
Used to forward CO line calls to a specified destination or refuse.
FWD/DND—Intercom calls
Used to forward intercom calls to a specified destination or refuse.
Group FWD—Both calls
Used to forward all the calls to your group to a specified destination.
VOICE CALL
(PF)