Panasonic AJ-HDC27FE - Manual (Page 56)

56 (E)
Adjusting the white balance and black balance
Adjusting the white balance
When FILTER INH is set to ON
When AWB is adjusted, the colour temperature and
filter number applying at the time are displayed.
If the filter is then turned, the colour temperature and
filter number are displayed.
The white balance is almost fully adjusted if the
subject is illuminated at a colour temperature
approaching the one displayed.
AWB is adjusted using subject filter (B) with a
lighting colour temperature of 3200 K.
(Example of display)
AWB A OK 3.2K
7
The filter is changed to filter (C)
7
The filter (B) is restored.
7
“4.3 K” is displayed.
(1): This indicates that AWB was adjusted using
the filter.
CC:C
4.3K
7
“3.2 K” is displayed, and the status when AWB was
first adjusted is indicated.
3.2K
If the colour temperature of the subject in this state
is near 4.3 K, the white balance is right and so the
camera can be used.
7