Polaroid Printer P50i - Manual (Page 15)

15
2 • 2 Loading Ribbon Cartridge
The P50i Printer requires approved ribbon cartridges (see Appendix C). The Resin Thermal Transfer and Dye
Sublimation ribbons are specifically designed for your P50i Printer. For optimum performance and printer life
(Print Head), always use approved ribbons.
You can print up to 100 cards in YMCKO with the ribbon cartridge.
When ribbon is completely used change the whole cartridge assembly.
DO NOT TOUCH the print head or the electronic components on the print head
carriage. Discharges of electrostatic charge from the human body or other surfaces
can damage the print head or other electronic components used in this device.
1 • Open printer cover by pressing both Cover Release buttons on the sides of your printer.
2 • With the “Top” label facing up and toward the front, vertically insert the ribbon cartridge into the slot and press
down gently until you can feel it engage properly.
Please note that the ribbon automatically synchronizes.