Installation – Planar LX1200 User Manual
Page 2

Installation
Touchscreen Setup -
1.
Refer to the User’s Guide for touch set-up
•
Latest t
•
ouchscreen drivers are available at
http://apps.planar.com/downloads/touchscreen/
SoftKey Set-up -
2.
Refer to the User’s Guide for SoftKey set-up instructions.
•
Recommended Mounting -
3.
Planar recommends an approved mount for in-vehicle use.
•
Cable Conn
4. ections
-
(Sold Separately. Refer to the diagram below).
To ensure reliability strain relief as needed.
USB Type B Upstream
1.
VGA Video Cable
2.
12V Power Input
3.
3.5mm Audio Input Cable
4.
Remote PC Shutdown/Start Control Cable
5.
(See User’s Guide)
Power Up -
5.
Connect the video an
•
d power cables. The unit will display a test screen
as soon as power is applied.
Use 5A fuse and a timer switch to avoid draining the battery.
•
Power up th
•
e computer. See the User’s Guide for the LX1200 at
www.planar.com/support for advanced set-up instructions.
Cleaning -
6.
Use a clean cloth to cle
•
an the display. If cleaning fl uid is required, mild
detergent or IPA can be used, if applied to the cloth fi rst.
Keyboard
(optional)
Computer
USB
VGA
Remote PC Shutdown/Start
Audio
12V
Power Source
ATTENTION:
Install touchscreen driver prior to making cable connections to your PC.