PYLE Audio PHST92 - Manual (Page 6)

Press the " " key on the remote control to choose the input mode "iPod, AUX, FM".
How to Play Stereo Audio
How to Open the System
Operation Instructions
(1) Operations of the Remote Control
When the "2.1 MUSIC CENTER" will appear on the LCD, when it disappears,
it suggests the system has opened.
"POWER" in the back panel is on,
Multi-function Control Area
1. : Select the following four submenu: , , , . Or enter to the
next menu.
2. " ": Return to the previous menu.
3. : Adjust settings.
" "
" "
For example:
a. When you want to
to reset the figures of hours, then press the key to set the minutes, after reset it, press
key again, the time on the screen will flicker continuously to
setup.
set the time, press the " " key and scroll to the menu by press
" ", followed by the " " key to enter time setting mode. Press " "
" "
" " confirm successful time
b. When you want to and press to enter
the menu . three options: , ,
. If you want to adjust the , press to enter the SW menu ress
to adjust the volume.
change the tone settings, scroll to the menu " "
"tone " Press the " " key to scroll through the
" " " ", p " "
d.
to hours, then press key to Press key
the time on the screen will flicker
alarm setup. After setting alarm, press the key to turn the alarm on. When alarm is on,
press the key to turn off the alarm, s> alarm
sound module, the system will turn to FM input mode and mute state; s> alarm
sound module, the system will turn to iPod input mode.
When you want to set the alarm, press the " " key and scroll to the menu by press
" ", followed by the " " key to enter alarm setting mode. Then Press " "
adjust the " " toggle to the minutes setting. " " after
adjusting the minutes setting, momentarily to confirm successful
" " you
can " "; " " or " " if you choose
if you choose
c. When you want to set and press to
enter the menu . two options: ,
. If you want to choose , press
the alarm sound module, scroll to the menu " "
"source " Press the " "key to scroll through the
" " then the LCD flicker, it suggest this function
has finished. The other options have the same operation.
2. Wake up the system by pressing any key when the system in the sleep mode.
Sleep mode lets you sleep to your system at the selected time.
1. Press "
" to select an amount of time before the system shuts off: 5, 15, 30 minutes, Sleep on or Sleep off.
How to Use Sleep Mode