Using the treadmill safety clip – Precor RECUMBENT RBK 800 User Manual
Page 88
34
Operating and Maintaining the P30 Console
Using the Treadmill Safety Clip
The treadmill is equipped with two different stop functions,
which behave as follows:
If the user …
Then the
treadmill
belt …
And the console …
Presses down on the red
STOP button
Slows to a
stop
Shows that the exercise
workout is paused
Pulls on the lanyard
attached to the safety
clip and trips the restart
switch
Slows to a
stop
Shows the words PUSH TO
RESET SWITCH and an
arrow pointing to the
Restart switch
The restart switch is located just below the console and
immediately behind the red
STOP button, as shown in the
following illustration. When it is tripped, the bar pops up,
displaying the words
PUSH TO RESET SWITCH on its front
side. The treadmill does not operate while these words are
visible.
Figure 5: Restart switch
Instruct users on how important it is to use the safety clip
while exercising on the treadmill, and demonstrate how they
should attach it to their clothing near the waistline.