Precor RECUMBENT RBK 800 User Manual
Page 22
20
Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes
6.
Insert the two upright support mounting screws through
the openings on the support and into the screw holes on
the body assembly. Tighten the mounting screws
completely using a ³₈-inch hex wrench.
Figure 7: Bolting the upright support into place
Important: In the following two steps, be extremely careful
not to trap or pinch any of the cables between the bike frame
and any of the covers.
7.
Reposition the left side cover on the body assembly, then
reattach and tighten the #10 x 1-inch self-tapping screws
holding it in place.
8.
Repeat the previous step to reinstall the rear and top
covers.
See also other documents in the category Precor Sports and recreation:
- 300753-201 (96 pages)
- EFX 5.25 (56 pages)
- EFX 5.25 (64 pages)
- EFX 5.19 (58 pages)
- Low Impact 9.27 (53 pages)
- 956i (114 pages)
- 846i (112 pages)
- Leg Press S3.25 (20 pages)
- 9.35 (96 pages)
- 9.23 (59 pages)
- S3.15 (36 pages)
- Low Impact M9.33 (66 pages)
- M9.1 (32 pages)
- RBK 815 (88 pages)
- M9.20s (40 pages)
- Electronic M9.4 (21 pages)
- ELLIPTICAL FITNESS CROSSTRAINERS EFX 885 (104 pages)
- EFX 5.21 (60 pages)
- EFX 5.23 (59 pages)
- LOW-IMPACT TREADMILLS 9.31 (86 pages)
- Commercial EFX EFX546 (40 pages)
- EXPERIENCE STRENGTHTM C-LINE CW34871-101 (45 pages)
- 946i (101 pages)
- Low Impact 9.23 (53 pages)
- Elliptical Fitness Crosstrainer EFX (108 pages)
- Elliptical Fitness Crosstrainer EFX (58 pages)
- TRM 800 (64 pages)
- RBK 800 (52 pages)
- Low Impact M9.55 (52 pages)
- EFX 556i (70 pages)
- Total Body 904 (28 pages)
- EFX 821 (48 pages)
- M9.41s (4 pages)
- AMT 885 (100 pages)
- Low Impact with the CardiologicTM System featuring Smart Rate M9.25i (44 pages)
- C932 (60 pages)
- Leg Press Option S3.15 (16 pages)
- Low Impact s 9.21i (36 pages)
- 5.33 (68 pages)
- EFX534 (56 pages)
- S3.23 (24 pages)
- Ellipticals EFX34i (80 pages)
- UBK 800 (52 pages)
- Manual 903 (20 pages)