Peavey CS-G series - Manual (Page 8)

SPECIFICATIONS
Output Power: (typical value)
V A C , 6 0 H z )
Stereo mode, both channels driven
2 ohms, 1 1% THD: 1500 W per channel
4 ohms, 1 1% THD: 1000 W per channel
8 ohms, 1 1% THD: 600 W per channel
Bridae mode, mono
4 ohms, 1 1% THD: 3000 W
8 ohms, 1 1% THD: 2000 W
Rated Output Power:
V A C , 6 0 H z )
Stereo mode. both channels driven
4 ohms, 20 Hz to 20 0.04% THD: 900 W
per channel
8 ohms, 20 Hz to 20 0.04% THD: 550 W
per channel
Power Bandwidth: (typical value)
Stereo mode. both channels driven
rated power, 4 ohms, 0.1% THD: 10 Hz to 40
Slew Rate: (typical value)
Stereo mode, each channel: 40 volts per
Bridge mode, mono: 80 volts per
Total Harmonic Distortion: (typical)
Stereo mode. both channels driven
20 Hz to 20 4 ohm rated load: 0.04%
Input Sensitivity Impedance:
Input attenuator set FCW
rated output power, 4 ohms: 1.5 V (0
20 k ohms
Frequency Response: (typical value)
Stereo mode. both channels driven
1 W RMS, 4 ohms: 10 Hz to 40
-0.3 rated output, 4 ohms: 20 Hz to 20
Damping Factor: (typical value)
Stereo mode, 8 ohms, 1 300
Hum Noise:
Stereo mode, below rated power. 4 ohms
100 unweighted
Power Consumption:
Stereo mode, both channels driven
rated output power, 4 ohms: 25 A 120 V AC,
13A 230VAC
Cooling System:
Dual, fans
DDT Compression System:
Switchable with LED
Dimensions Weight:
Height: 5” (8.9 cm)
Width: (48.3 cm)
Depth: (43.2 cm)
Weight: 35 Ibs. (15.9 kg)
Three-Rack Space, Class BG, Dual-Rail Design with
NSSER Topology (NSSER: Nonsaturating Series Single
Emitter Resistor).
Patent Pending.
8