Lucent Technologies Guestworks SErver 1079984G3 - Manual (Page 92)

86 Issue 1 April 1997
Recorded Announcements
■ On Page 2 of this form, enter an extension in the Routing Extension
on Unavailable Voice Synthesis field. This is the extension
number where you route calls when the speech synthesizer circuit pack
is busy or out of order. Put the attendant’s extension or the extension of a
backup voice terminal in this field since the attendant or backup voice ter-
minal user can input wakeup calls and Do Not Disturb requests manually.
■ On Page 2 of this form, enter a time value in the Length of Time to
Remain Connected to Announcement field. This is the amount of
time someone can listen to a wakeup announcement before the line is
dropped. Enter a value from 0 to 300 seconds. If you have a limited num-
ber of speech synthesizer circuit cards, these calls should be limited to
10 seconds. Some wakeup calls may not be completed on time if you
allow guests to listen to wakeup announcements for longer than 10 sec-
onds.
list integrated-annc-boards
■ Use this command to display a list of all active announcement exten-
sions, the length of each message, and the amount of recording time
available.
Required Hardware 0
The server supports the following announcement circuit packs:
■ Integrated Announcement circuit pack (TN750C) — The announcement
circuit pack is used to provide automatic wakeup messages and call
prompts for the Direct Access Calling feature. The use of the announce-
ment circuit pack gives the hotel management the flexibility to make
changes to their wakeup announcements, add announcements when
needed, and deliver wakeup messages in the language of a foreign
guest.
■ Speech Synthesizer circuit pack (TN725B) — The speech synthesizer
circuit pack must be installed to allow guests to create their own wakeup
calls.