Lucent Technologies Guestworks SErver 1079984G3 - Manual (Page 73)

Issue 1 April 1997 67
Feature Descriptions
Administration 0
change system-parameters hospitality
■ On Page 1 of this form, enter an assignment in the Message Waiting
Configuration field. If you do not have a PMS, or the message waiting
notifications are not controlled by the PMS, put act-nopms in this field. If
the message waiting notifications are controlled by the PMS, put
act-pms in this field. The PMS vendor should be consulted concerning
this setting.
change attendant 1
■ On Page 2 of this form, add the following feature buttons:
— mwn-act
— mwn-deact
change station XXXX (XXXX is the extension number of a backup voice termi-
nal)
■ Add the following feature buttons:
— mwn-act
— mwn-deact
change station XXXX (XXXX is the extension number of a visually impaired
guest)
■ On Page 1 of this form, enter y in the Audible Message Waiting
field.
Required Hardware 0
There is no special hardware required for this feature.