Linksys RT042 - Manual (Page 59)

53 Appendix E: The Setup Wizard
Broadband Router
If you chose Static IP, the Static IP screen appears. Enter the Static IP, Subnet Mask, and Default Gateway
provided by your ISP. Click Next to continue. Click Previous if you want to return to the previous screen. Click
Exit if you want to exit the wizard.
If you chose PPPoE, the PPPoE screen appears. Enter the User Name and Password provided by your ISP.
Click Next to continue. Click Previous if you want to return to the previous screen. Click Exit if you want to
exit the wizard.
5. On the final screen, you can save your settings, if you don’t need to make any changes. Click Previous if you
want to return to the previous screen. Click Exit if you want to exit the wizard.
Figure E-6: PPPoE
Figure E-7: Basic Setup Tab - Network
Figure E-5: Static IP