Lindy GMBH - Manual (Page 23)

Step 7 Example: OSD H-Position
“OSD Manu icon” keeps flashing.
* Keeps presses
“+ key”:
Value in the Scale is
increasing until 120
* Keeps presses
“- key”:
Value in the Scale is
decreasing until 0
Release the key, the
value will stop at
the satisfied point.
Step 8 Example: OSD H-Position
“OSD Manu icon” keeps flashing.
Step 9 Example: Exit
7. “OSD Manu icon” keeps flashing.
8. “Exit” marked on indigo light.
As for OSD Timer.
Repeat step 5~
step 8.
21
+/- key
Manu key
OSD
H-Position
adjustment is
completed.
The system is
ready for next
selection.
+/- key
To select Exit