Lucent Technologies Voice Terminal 8403 User Manual
Page 14
11
To program or reprogram a
personal list item
1
On a separate sheet of paper, write the outside numbers,
extensions, and/or feature access codes you want to program
as items on your personal list(s).
Note: Each phone number or feature access code is stored as
a separate item.
2
While off-hook, dial the Abbreviated Dialing Program access
code _______
[dial tone].
3
Dial the Personal List number (1, 2, or 3)
[dial tone]
4
Dial the list item (1, 2, 3...)
[dial tone]
5
Dial the outside number, extension, or feature access code you
want to store (up to 24 digits)
6
Press
[confirmation tone, then dial tone]
•
Repeat Steps 4 through 6 if you want to program
additional items on the same list. Hang up and begin again
at Step 1 if you want to program items on another
personal list
7
Hang up
•
Record your personal list items on the Abbreviated
Dialing list in the back of this guide.
#
To place a call using an AD
list button or code
1
Dial the appropriate AD List code:
•
List 1 __________
•
List 2 __________
•
List 3 __________
or press
, then the appropriate entry number (or
* or #) if you have a list access code programmed as a
Feature Directory entry
2
Dial the desired list item (1, 2, 3...)
[ringback tone]
•
Call is automatically dialed
Note: Keep your own personal lists in the back of this
guide; system, group, and enhanced lists are available from
your system manager.
Feature