Lindy 42799 - Manual (Page 12)

User Manual English
12
Windows Vista
Installing the device driver enables your computer’s operating system to recognize the
adapter once it’s connected. Please check your operating system and refer to the
appropriate installation procedure to begin installing the device driver.
Please make sure the USB VGA Adapter is unplugged from your PC or Notebook
before executing the setup program. This section illustrates the simple device driver
installation procedure for computer running Windows Vista operating system.
Step 1
Insert the Driver CD into the CD-ROM drive; the setup program should be launched
automatically. If setup program does not begin automatically, click Start, Run and
double click “D:\Setup.exe” (where D: is the path of your CD-ROM drive).
Step 2
Driver Installation Wizard, click “Next”
to continue.
Step 3
License Agreement; please review it
and check “I accept the terms of the
license agreement.” Click “Next” to
accept the License Agreement.
Step 4
Windows Security warning dialogue box
under Windows Vista, it will not affect
the device driver installation and usage
the device. Please select “ Always trust
software from “Magic Control
Technology Corp. ” , then click “Install”
to continue.