Lincoln Electric INVERTEC V350-PRO IM679-A - Manual (Page 30)

F-3 DIAGRAMS F-3
V350-PRO
N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION. N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO CHANGE POLARITY, TURN POWER "OFF", REVERSE ELECTRODE AND WORK CABLE AT POWER SOURCE. N.C. INSULATE EACH UNUSED LEAD INDIVIDUALLY.
TO WORK
- +
14 PIN AMPHENOL
N.C.
ELECTRODE CABLE TO LN-25
K867 ADAPTER
LN-25 WITH K431 OPTION
K432 REMOTE CONTROL CABLE
E F D A B C
77 76 75
SPARE
4 2
21 82 81 42 41
GND
31 32
N.D.
N.D. REMOVE 6 PIN PLUG FROM K432 CABLE IN ORDER TO CONNECT K867 PLUG. LABEL EACH LEAD (A THRU F) AS THEY ARE REMOVED FROM 6 PIN PLUG.
N.E.
N.E. SPLICE LEADS AND INSULATE.
Only qualified persons should install, use or service this machine. using the disconnect switch at the fuse box
WARNING
Turn off input power to the Welding Power Source
Before connecting the wire feeder.
ELECTRIC
SHOCK
CAN KILL
INVERTEC POWER SOURCE
S19405
1-25-91
K867 PLUG TO LN-25 - CONNECTION DIAGRAM