Linksys Owtalk - Manual (Page 5)

The SIP port number is set at 6060 . For the remaining tabs, you can accept the
default settings, or you change them to suit your setup.
Click Save Settings to enable the settings.
After the ATA set up procedure is complete, the device is ready for use and you
can now receive and make outgoing calls.
8
9
10
To activate your Owtalk preconfigured device, you need to obtain an
activation number. Go to
My Account after sign-up for Owtalk at
http://www.owtalk.com . Press Port to Preconfigured and click Next to get
the activation number.
Simply dial the activation number after connecting your ATA to your
cable/ADSL modem, router, or broadband Internet connection. Your ATA is
then all set and ready for use.
Appendix A
Owtalk Preconfigured
Linksys ATA