Liebert Air Cooled - Manual (Page 21)

Inspection and Installation
17
Figure 15 Attaching sling to a 6-fan or 8-fan unit for moving
3.5.2 Mounting the Condenser
The condenser must be installed so that it is level within 1/2" (13mm) to ensure proper refrigerant
flow. For roof installation, mount the condenser on suitable curbs or other supports; follow all local
and national codes. Secure the legs to the mounting surface using a field-supplied 1/2" (13mm) diame-
ter bolt in each of the two 5/8" (16mm) holes in each leg. See Figures 3, 4 and 5 for anchor dimen-
sions.
Step 4
Step 5
Six-fan unit shown for illustration.
Method for 8-fan condenser is the same.