La Crosse Technology WS-811561 - Manual (Page 6)

Page 6 of 12
4. Set Time - Hour:
Press the “SET” button a fourth time and the Hours
digits will flash. Use the “PLUS“ button to select the
correct hour.
5. Set Time - Minute:
Press the “SET” button a fifth time and the Minutes
digits will flash. Use the “PLUS“ button to select the
correct minute.
6. Set Date - Year:
Press the “SET” button a sixth time and the Year
digits will flash. Use the “PLUS“ button to select the
correct year.
7. Set Date - Month:
Press the “SET” button a seventh time and the
Month digits will flash. Use the “PLUS“ button to
select the correct month.
8. Set Date - Date:
Press the “SET” button an eighth time and the Date
digits will flash. Use the “PLUS“ button to set the
correct date.
9. Set Date - Day of Week:
Press the “SET” button a ninth time and the Day of
Week abbreviation will flash. Use the “PLUS“
button to set the correct day of week.
10. Set 12 or 24 Hour Time Mode:
Press the “SET” button a tenth time and the 12 or
24 Hour Time Mode digits will flash. Use the
“PLUS“ button to set the time mode to either a 12
or 24 hour clock.
11. Set Temperature Mode - °F or °C:
Press the “SET” button again and the Temperature
Mode abbreviation will flash. Use the “PLUS“
button to set the temperature mode to °F or °C.
Setting the Time Alarm
1. To turn the alarm on:
Press the "ALARM" button. The LCD will display the
alarm icon
.
2. To set the Alarm Time - Hour:
Press and hold down the "ALARM" button for 2
seconds until the hours digits flash. Use the “PLUS”
button to set the hour. Press the "ALARM" button to
confirm your setting and move to setting the minutes.
3. To set the Alarm Time - Minutes: