Lenovo D1960 - Manual (Page 7)

Attaching the Cables
Cable Connections On Back of Monitor and Computer
1. Power Cord
2. Audio Cable
3. DVI Cable
4. Analog Cable
Turn off your computer before performing the procedure below.
1. Connect the power cable to the AC port on the back of the monitor.
2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other
end to the computer’s D-Sub port.
3. (Optional – Requires a video card with DVI port) - Connect one end of the 24-pin DVI cable
to the back of the monitor and connect the other end to the computer’s DVI port.
4. Plug audio cable between the computer multimedia (or sound) card’s audio output and
monitor’s audio input.
5. Turn on your monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
Troubleshooting.
1 23 4