Linksys Network Router - Manual (Page 17)

14 Chapter 5: Setting Up the Wireless-G Range Expander
Wireless-G Range Expander
9. You should now review the settings you've chosen. If these settings are correct, click the Yes button to save
these settings. If you wish to change any of the settings, click the No button. You will exit the Setup Wizard
and can start it again to revise your settings.
10. At this point, the configuration performed with the Setup Wizard is complete. To configure any other Range
Expanders in your network, you can run this Setup Wizard again. Click the Exit button to exit the Setup
Wizard.
Figure 5-11: The Confirm New Settings screen
Figure 5-12: The Congratulations screen