Lucent Technologies 5800 Series - Manual (Page 65)

Efficient Networks
®
5800 Series
User Reference Guide
Chapter 5: Product Specifications
Efficient Networks
®
Page 5-7
• Web graphical user interface
• User selectable fail/restore criteria
• Optional modem connector (DB9 or DB25)
• Supports L2TP and IPSec tunnel failover
Asynchronous Transfer Mode (ATM)
• Encapsulation (IP, Bridging, and Bridge Encapsulated Routing) (RFC
1483)
• PPP over ATM (LLC and VC multiplexing) (RFC 2364)
• PPP over Ethernet
• Classical IP (RFC 1577)
• AAL5 for data
• Multiple Virtual Circuits (VCs)
• Virtual Circuit (VC) traffic shaping (UBR, VBR, CBR)
• L610 OAM F5 loopback
IP Address Translation
• Network renumbering (RFC 1631)
• Network Address Translation (NAT/PAT)
• LAN servers supported with NAT
• Support for NAT inside an IPSec tunnel
Protocol Conformance Testing
• RFC 1483 (Bay Networks™, Cabletron™, Cisco™, RedBack™)
• PPP over ATM (Cisco, Escalate™, RedBack) (RFC 2364)
• Tested with Copper Mountain™, Interspeed™, Lucent™, New
Bridge™, Nokia™, Pair Gain™, Paradyne™, Promatory™, SDSL.
PPP (RFC 1661)
• Data compression of up to 4:1 (STAC™ LZS) (RFC 1974)
• Van Jacobsen header compression (RFC 1144)
• Spoofing and filtering (IP-RIP, IPX-RIP, SAP, Watchdog,
serialization)